EXCITATION
14V or 10V @ 25mA

INPUT IMPEDANCE
Voltage Range: 1Mohm
Current Range: 10ohm

ISOLATION
Three way isolation up to 1800 V Peak for 1 minute, 354 V Peak continuous per IEC spacing Common mode rejection 100dB

INPUT OVER-VOLTAGE PROTECTION
Voltage input: 50V
Current input: 50mA

MODE
Linear, Square root, Linear totalize, Square root totalize

ANALOG TO DIGITAL TECHNIQUE
Multiple slopes

READ RATE
8 readings/second, automatic polarity

ACCURACY AT 25 ░C
▒0.1% of FS ▒ 2 counts

TEMPERATURE STABILITY
100 ppm/░C typical

STEP RESPONSE FOR RS485 OUTPUT
2 seconds to 99% of the final value (Filter time constant = 64)

RESPONSE TIME
To verify the response time, check the carriage return <CR>, it will be sent at the end of the response. You can send another command after you receive the <CR>.
i.e. send: *01X01 / response: 01X01
Note: 01 is address.

WARM UP TO RATED ACCURACY
30 minutes

INPUT POWER
10 to 32 Volt

DC POWER CONSUMPTION
3 Watts (125 mA at 24 V DC)

OPERATING AMBIENT
-5 to +55 ░C

STORAGE TEMPERATURE
-40 to +85 ░C

RELATIVE HUMIDITY
90% at 40 ░C non-condensing